Write a Review

- 2.5mm thick, ergonomic handlebar tape for all road bike disciplines - EVA foam distributes pressure and reduces hand discomfort - Tape is durable and provides increased vibration damping - Anti-slip surface texture - Built-in wrapping guide for thinner or thicker wrapping - Wrap in two directions; for increased grip or more freedom of movement

With optimized material concentrated at the brace and seal area, outstanding stiffness and steering precision, and new E-MTB configured fork options with fender mounting points, Recon Silver is an all-around performer suited for any MTB or E-MTB bike. Features - New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (15x110mm version) - New graphics are easy to read and make a fresh impact - Motion Control damping featuring low-speed compression adjustment to lockout - Fit Tires up to 2.8" (15x110mm version without fenders; the use of a full fender will reduce tire clearance) - Fast Black finished 32mm steel upper tubes couple stiffness with a premium look

A gravel handlebar with a wider flare that gives riders more comfort and control through any terrain. The bar with a flare for adventure The GR Elite Road Handlebar is a lightweight alloy bar designed to give gravel and adventure riders more comfort, control, and confidence, especially when in the drops. IsoZone EVA pads deliver entire-ride comfort, while the bar's 75mm reach, 128mm drop, and 13-degree flare make it easy to access brake levers and shifting controls from all riding positions. Product details - 13-degree flare allows for more control in the drops - Custom-butted, lightweight 6061-T6 alloy construction - Shorter reach and wider flare allows for confident handling and easy access to controls - Replaceable IsoZone EVA pads add comfort while maintaining original grip diameter - Compatible with Shimano EW-RS910 bar end Junction-A for cleaner Di2 routing - Laser-etched brake lever position lines for spot-on control setup - Compatible with clip-on aero bars

Features: - Smooth shifting and less cadence shock - Close step (10T) - SIDE SWING construction - Efficient cable routing - OPTISLICK cable - Stable performance on suspension bikes - Shifts properly while rear suspension handles rough trails and obstacles - Consistently quiet driving while rear suspension position changes - Custom plate design for single spike gear structure - Chain catcher - 2x10-speed

- Rider Tuned Gearing - Wider Gear Combination: 11 – 28T/12 – 28T/11 – 30T (New Gear Combination) - Closer Gear Combination: 11 – 25T/12 – 25T - Lightweight - CFRP & Alloy Spider Arm, 5 Titanium Sprockets - Gear Combination: 11 – 25T, 11 – 28T, 11 – 30T (New Gear Combination), 12 – 25T, 12 – 28T

The Shimano Deore XT CN-M8100 12-speed chain is optimized for use with the Deore XT M8100 MTB drivetrain system. - HYPERGLIDE+ technology dedicated chain delivers greater chain retention, improved shifting efficiency, and smoother transmission over rough terrain - Extended inner plate improves chain engagement - Reduced shift times and pedaling shock - Includes Non-reusable Shimano Quick-Link (SM-CN910-12) - Links (links): 126 - Color: Silver - Drivetrain Speeds: 12 - Weight: 252 g

Keep your seatpost right where you left it. Upgrade to a quick release seatpost clamp for easy seat height adjustments. - Follow laser-etched torque listing on collar

SRAM's 1050 10-Speed Cassette is a great choice. It's constructed of light and durable materials and boasts SRAM's PowerGlide tooth profiles and shift ramps for quick and positive gear changes every time. This trick cassette also sports a semi-spider construction for a maximum stiffness-to-weight ratio and is available in myriad configurations to suit all your riding. There are even models with 36-tooth largest cogs for super-easy climbing.

Designed to handle whatever you can throw at it. Aluminum crankarms in a wide range of lengths and the DUB bottom bracket system mean the Rival crankset will keep spinning, no matter what. A tight and consistent 13-tooth gap between chainrings makes for accurate and dependable shifting. - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Crisp and accurate front shifts - DUB bottom bracket adds durability, simplicity, and virtually universal frame compatibility - BB not included

An integrated bar and stem combo that cleanly and securely holds cables for a refined look and added aerodynamics. Save watts, ride faster This aero upgrade cleans up your cockpit by securely storing cables for a refined look and free speed. The Aeolus RSL bar/stem combo is proven in the wind tunnel to save 7 watts, making it 10% faster than its predecessor. It's light, fast, easy to install, and Blendr-compatible for seamless integration of your light or Garmin. Details: - OCLV Carbon construction is ultra-light, compliant, and durable - Integrated bar/stem design improves aerodynamics and saves weight - Proven in the wind tunnel to save 7 watts, making it 10% faster than its predecessor - Integrated cable management system held secure with M4 hex bolt, 5Nm torque - Variable Radius Compact (VR-C) design allows longer reach and drop - Includes Blendr mono and duo bases with mounts for Ion light and Garmin computer - Approved for use with carbon or alloy steerer

The Shimano EF500 8-Speed dual brake/shift lever features reach adjust technology and an optical gear display. - Equipped with a reach adjust mechanism that allows for the distance from handlebar to lever to be adjusted in order to suit any hand size and riding preference - The optical gear display tells you which gear position is selected while riding - Compatible with V-Brake, Mechanical disc brake (MTB)

The Shimano BL-MT200 Hydraulic Disc Brake Lever and BR-MT200 Disc Brake Caliper - Brakes are pre-bled - Hydraulic hose included - Rotor not included

The 1999 Sidepull Brake is a lightweight brake kit for BMX. - Includes brake, lever and cable - Reach is 66-90mm

Our premier X-Range gearing; which utilizes tight jumps between chainrings and a 12-speed, wide range, 10-tooth start cassette; is now available for Rival. This includes new cassettes that feature smooth, precise shifting in ranges that cover road, gravel, and everything in between. - X-Range gearing gives you more range and a smoother gear progression, so you're always in the right gear - Nickel chrome plating for quiet and durability - FULL PIN construction for durability and light weight - Designed to work with an XDR driver body

Grips are a key point of contact between you and your bike. Comfortable grips are a must-have. Product details - Designed for use on kids' bikes without shifters - Set of two grips Specifications - Length: 107mm - Diameter: 22.2mm - End Type: Closed - Lock-on: No - Material: Kraton Rubber

The radical look and feel of SRAM's X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. They subjected every size of chainring to untold environmental and mechanical tortures, abuse and neglect, in both lab and real-world settings, to come up with a chainring that would augment the Eagle drivetrain’s performance in all conditions. The longer, positive-rake tooth shape has been designed to work perfectly with the Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise and wear.

The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.

Race Face Next SL Direct Mount Chainrings • 7075-T6 aluminum, aerospace grade strength • Compatible for 9, 10, and 11 speed • Narrow Wide tooth profiling ensures ultimate chain retention • Attaches as part of the Race Face CINCH system (using tool TL6800) allowing you to switch between Direct Mount rings/spiders with ease • Utilizes Race Face proprietary spline design • Stiff 4mm plate thickness to transfer loads without flexing • 41 grams (26T) ranging up to 82 grams (36T) • Compatible with Race Face cranks with CINCH system interface

KMC X12 chains feature a double X bridge shape for fast and smooth shifting. - Compatible with SRAM 12-speed systems - Double X bridge shape with inner and outer plate chamfering for smooth and fast shifting - Mushroom riveted pins for the highest pin power and allows shifting under heavy loads - 1/2 x 11/128 - 126 Links

SRAM's GX 2x10 rear derailleur provides incredible shifting speed and precision. Exact Actuation technology eliminates slop and shifting variation. Roller Bearing Clutch technology delivers maximum drivetrain stability—even through the most punishing terrain. And with Cage Lock technology, wheel removal and installation are easier than ever.

Riser kits increase stack height to fit a wide range of riding styles for efficient positioning; compatible with ZBS Aerobars, T Plus Carbon Series Aerobars, T Plus Aluminum Series Aerobars, Supersonic Aerobars, Sonic Aerobars, and Subsonic Aerobars. - Multiple kits can be used to reach desired height up to 80mm rise - Raises armrest and extensions together to maintain a comfortable wrist position - Kit includes a pair of risers, bolts specific to riser size, and mounting hardware - Risers are compatible with J2, J3, and J4 Aerobar brackets - Clamp diameter: 31.8mm

- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip

Shimano's Ultegra bottom bracket uses Pro Tour-proven technology for lighter weight and super smooth spinning, while still maintaining the same level of durability and stiffness. It's available in English, Italian, or Press Fit models.

Shimano Ultegra R8000 crankset. - Optimized lightweight crank arm design produces excellent power transfer efficiency - Minimized weight without sacrificing stiffness - Hollowtech II - Rider tuned gear performance through various gear combinations - Possible to choose the best choice for ride - Redesigned FC for greater frame compatibility - Wider gear pitch increases clearance between chain and leading teeth to provide compatibility with frames with O.L.D. 135mm and 410mm chain stay length - Model Number : FC-R8000 - Series: Ultegra - Crank Construction: Hollowtech II - Crank Arm Length : 165, 170, 172.5, 175mm - Bottom Bracket : SM-BBR60/SM-BBR60-PB - Chain Line: 43.5 - Average Weight: 690 grams (53-39T), 681 grams (52-36T), 674 grams (50-34T), 668 grams (46-36T)

A light and versatile saddle with a shorter profile for targeted comfort, perfect for riders of all genders and all disciplines. Comfort in a compact package Verse Short Elite brings comfort to any riding position thanks to a lightweight package and targeted support, backed by a versatile design that’s optimized for any rider, any gender, and any discipline. A full cutout provides long-haul comfort and Wing Flex allows the saddle’s edges to flex and adapt to riders’ inner leg movement and pelvic rotation. Product details: - Short profile provides targeted support for riders of any gender in a performance riding position - Wing Flex allows the shell's edges to adapt to rider's inner legs movement and pelvic rotation - Full saddle cutout minimizes soft tissue pressure for lasting comfort and performance - Featherweight shell with Austenite rails that are lighter and stronger than hollow titanium - Elite-level trim optimizes foam padding for added lightweight comfort - Multiple widths and extended rail clamping area give more fit options - inForm saddles are born of cutting-edge biomechanical research to maximize performance and rider comfort - Blendr accessory mounts offer clean integrated mount for rear Flare light Features: For men, for women, for mountain, for road. Verse Short is designed to add comfort for all genders. It's your go-to performance posture saddle for both trail and road. Short profile The short profile provides targeted support and a performance riding position for all genders. Wing flex Wing flex allows the saddle shell's side edges to flex and adapt to a rider's inner leg movement and pelvic rotation. Full-length cutout A full saddle cutout minimizes soft tissue pressure for lasting comfort and performance.

The PM 2.0 an update of our Peak saddle. PM saddles incorporate a rounded and sloped rear end, allowing the rider to move up-and-over the back of the seat on technical trails. The PM 2.0 also excels at long-distance events, such as 24-hour racing. With long hours in the saddle, nobody wants to go numb – and this is your perfect weapon. Like all ISM saddles, the PM 2.0 is nose-less and designed to remove pressure from soft tissue, ensuring maximum blood flow, no genital numbness, and a healthier, more enjoyable ride. Key features: - Sloped rear for clearance on technical trails - Same basic design as the popular Performance Short models Commonly used for: - Mountain bikes Tech specs: - Category: Performance Mountain - Length: 260mm - Width: 130mm - Padding: 30-series Foam and Gel - Rails: Chromoly - Color: Black

Key features: - Original equipment replacement saddle ears for use with Bontrager saddles with carbon rails - Compatible with Bontrager and Trek rotary head seatpost and seat mast systems - Consult with manufacturer on compatibility with other saddle brands

Get back on the road with a genuine replacement fork. The fork you need. - Original replacement fork - Color matched for direct compatibility

Key features: - Cable actuated remote lever for the Bontrager Drop Line dropper seatpost - Also compatible with most other cable-actuated dropper seatposts - Under Bar Lever is designed to ergonomically replace the left shifter on 1x drivetrains - Universal Lever is compatible with 1x, 2x, 3x drivetrains and left or right hand placement - Use with: Drop Line Seatpost

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.